Need professional mold remediation in Dubai for AC leak?« Back to Previous Page

Based on your description, this is absolutely a job for a professional mold remediation company and not a DIY situation. The fact that you wiped it and it came back worse is a classic sign of a deep-seated infestation. The dampness seeping into the drywall is a major concern; porous materials like gypsum board act as a food source for mold, allowing it to spread invisibly within the wall cavity.

In Dubai's climate, AC leaks are a primary cause of indoor mold growth due to the high humidity levels. The black and green coloration indicates a potentially toxic species, like Aspergillus or Penicillium, which can pose serious health risks. Our standard remediation protocol for a scenario like yours in a Jumeirah villa would involve:

1. Containment: Sealing the affected area with plastic sheeting to prevent cross-contamination.
2. Removal: Cutting out and properly disposing of the contaminated drywall and any affected insulation behind it. Simply wiping surface mold is insufficient.
3. Hygienization: Treating the remaining structure and the area with professional-grade, UAE-approved biocides and antimicrobial solutions.
4. Drying: Using industrial air movers and dehumidifiers to ensure the cavity is completely dry before any reconstruction.
5. Verification: Post-remediation testing to confirm spore counts have returned to safe, ambient levels.

Budgeting is difficult without an on-site inspection, as it depends on the exact square footage of contamination. However, for a significant leak affecting a bedroom wall and wardrobe, you should budget anywhere from AED 5,000 to AED 15,000+ for the full remediation, drying, and disposal process. This does not include the cost of repairs to the drywall or the AC unit itself, which must be fixed by an HVAC technician to prevent recurrence.

This is a serious issue that requires immediate professional attention. For a proper assessment and accurate quote, please call our certified inspectors at 800-MOLDS (800-66537) or email hello@saniservice.com.