AC mold from leaky Dubai AC: professional removal cost?« Back to Previous Page

Based on the symptoms you've described—a recurring black mold patch originating from an AC leak—this is absolutely a job for a certified professional mold remediation company in Dubai. The combination of a constant moisture source from the leak and our high ambient humidity creates a perfect storm for aggressive mold growth that DIY methods like vinegar cannot address.

The primary concern is that the visible mold on the wall surface is likely just the tip of the iceberg. The leak has almost certainly saturated the internal wall cavity (the drywall/partition block and insulation), creating a massive hidden reservoir of mold that will continue to spread and release spores into your indoor air. This poses significant health risks, from allergic reactions to more severe respiratory issues, and can cause structural degradation of the building materials.

A proper remediation process for a case like this in JVC would involve several critical steps: First, a thorough inspection and air quality testing to determine the full extent of contamination. Then, setting up containment with negative air pressure to prevent cross-contamination, followed by the safe removal and disposal of all affected porous materials (the damaged section of wall). The AC unit and drain line must be inspected and repaired by a certified HVAC technician to eliminate the source of the moisture. Finally, the area will be HEPA-vacuumed, cleaned with EPA-approved antimicrobial agents, and the wall rebuilt.

Budgeting is difficult without an on-site inspection, as cost depends on the square footage affected. However, for a significant wall patch stemming from an AC leak, you should budget anywhere from AED 3,000 to AED 8,000+ for a complete, professional remediation. This investment ensures the problem is solved at its root, protecting your health and your property's integrity.

For an accurate assessment and quote, I strongly recommend you contact a specialist like Saniservice. Call 800-MOLDS (800-66537) or email hello@saniservice.com. They will perform a comprehensive inspection and provide a detailed scope of work and cost breakdown.